![]() ![]() However, the MPO connector is not manufactured with the floating ferrule. In other words, the floating ferrule of the MTP® connector can float inside to keep physical contact over a mated pair under an applied load. The floating ferrule is adopted in an MTP® cable for improving mechanical performance. ![]() The MTP® design includes a recessed pin clamp and oval spring will ensure a secure spring seat, and greater clearance between the spring and the ribbon cable in order to reduce the risk of damage to the MTP® cable. In the MTP® connector, the oval spring is used to maximize the gap between fiber ribbon and spring, which can protect the fiber ribbon from damages during inserting. MPO connector is usually equipped with inferior plastic pin clamps, which may lead to effortless breaking of pins with constant cable mating, while the MTP® connector has a metal pin clamp to ensure a strong clasp on the pins and minimize any inadvertent breaking when mating connectors. ![]() As the improved version, MTP® cables equipped with MTP® connectors have better mechanical designs and optical performances. The key difference between MTP® and MPO fiber optic cables lies in their connectors. MTP® vs MPO Cable: What Are the Differences? Click here to know more about MTP® connector. However, the MTP® connector is a multiple engineered product enhancement to improve mechanical and optical performance when compared to generic MPO connectors. So MTP® connectors are fully compliant with all generic MPO connectors and can interconnect directly with other MPO based infrastructures. MTP® connector is a trademark by US Conec for a version of the MPO connector with improved specifications. MTP® cables, short for (Multi-Fiber Pull Off), are equipped with MTP® connectors at either end. At present, MPO connectors are typically available with 8, 12, 16 or 24 fibers for common data center and LAN applications, and 32, 48, 60, 72 fiber counts are also possible in large scale optical switches for specialty super high- density multi-fiber arrays. MPO connector is compliant with the IEC 61754-7 standard and the U.S. MPO fiber connector is for ribbon cables with more than 2 fibers, which is designed to provide multi-fiber connectivity in one connector to support high bandwidth and high-density cabling system applications. MPO (Multi-Fiber Push On) cables are capped with MPO connectors at either end. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |